CCNA
2.1 Configure and verify VLANs (normal range) spanning multiple switches
CCNA
0%
Completed
Network Fundamentals
1.1 Explain the role and function of network components
Reading
1.2 Describe characteristics of network topology architectures
Reading
1.3 Compare physical interface and cabling types
Reading
1.4 Identify interface and cable issues (collisions, errors, mismatch duplex, and/or speed)
Reading
1.5 Compare TCP to UDP
Reading
1.6 Configure and verify IPv4 addressing and subnetting
Reading
1.7 Describe the need for private IPv4 addressing
Reading
1.8 Configure and verify IPv6 addressing and prefix
Reading
1.9 Compare IPv6 address types
Reading
1.10 Verify IP parameters for Client OS (Windows, Mac OS, Linux)
Reading
1.11 Describe wireless principles
Reading
1.12 Explain virtualization fundamentals (virtual machines)
Reading
1.13 Describe switching concepts
Reading
Network Access
2.1 Configure and verify VLANs (normal range) spanning multiple switches
Reading
2.2 Configure and verify interswitch connectivity
Reading
2.3 Configure and verify Layer 2 discovery protocols (Cisco Discovery Protocol and LLDP)
Reading
2.4 Configure and verify (Layer 2/Layer 3) EtherChannel (LACP)
Reading
2.5 Describe the need for and basic operations of Rapid PVST+ Spanning Tree Protocol and identify basic operations
Reading
2.6 Compare Cisco Wireless Architectures and AP modes
Reading
2.7 Describe physical infrastructure connections of WLAN components (AP,WLC, access/trunk ports, and LAG)
Reading
2.8 Describe AP and WLC management access connections (Telnet, SSH, HTTP,HTTPS, console, and TACACS+/RADIUS)
Reading
2.9 Configure the components of a wireless LAN access for client connectivity using GUI only such as WLAN creation, security settings, QoS profiles, and advanced WLAN settings
Reading
3.0 IP Connectivity
3.1 Interpret the components of routing table
Reading
3.2 Determine how a router makes a forwarding decision by default
Reading
3.3 Configure and verify IPv4 and IPv6 static routing
Reading
3.4 Configure and verify single area OSPFv2
Reading
3.5 Describe the purpose of first hop redundancy protocol
Reading
4.0 IP Services
4.1 Configure and verify inside source NAT using static and pools
Reading
4.2 Configure and verify NTP operating in a client and server mode
Reading
4.3 Explain the role of DHCP and DNS within the network
Reading
4.4 Explain the function of SNMP in network operations
Reading
4.5 Describe the use of syslog features including facilities and levels
Reading
4.6 Configure and verify DHCP client and relay
Reading
4.7 Explain the forwarding per-hop behavior (PHB) for QoS such as classification, marking, queuing, congestion, policing, shaping
Reading
4.8 Configure network devices for remote access using SSH
Reading
4.9 Describe the capabilities and function of TFTP/FTP in the network
Reading
5.0 Security Fundamentals
5.1 Define key security concepts (threats, vulnerabilities, exploits, and mitigation techniques)
Reading
5.2 Describe security program elements (user awareness, training, and physical access control)
Reading
5.3 Configure device access control using local passwords
Reading
5.4 Describe security password policies elements, such as management, complexity, and password alternatives (multifactor authentication, certificates, and biometrics)
Reading
5.5. Describe remote access and site-to-site VPNs
Reading
5.6 Configure and verify access control lists
Reading
5.7 Configure Layer 2 security features (DHCP snooping, dynamic ARP inspection, and port security)
Reading
5.8 Differentiate authentication, authorization, and accounting concepts
Reading
5.9 Describe wireless security protocols (WPA, WPA2, and WPA3)
Reading
5.10 Configure WLAN using WPA2 PSK using the GUI
Reading
6.0 Automation and Programmability
6.1 Explain how automation impacts network management
Reading
6.2 Compare traditional networks with controller-based networking
Reading
6.3 Describe controller-based and software defined architectures (overlay, underlay, and fabric)
Reading
6.4 Compare traditional campus device management with Cisco DNA Center enabled device management
Reading
6.5 Describe characteristics of REST-based APIs (CRUD, HTTP verbs, and data encoding)
Reading
6.6 Recognize the capabilities of configuration management mechanisms Puppet, Chef, and Ansible
Reading
6.7 Interpret JSON encoded data
Reading
More
Announcements
Reviews
Course Info
2.1.a Access ports (data and voice)
2.1.b Default VLAN
2.1.c Connectivity
Hide similarities
Highlight differences
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
Image
SKU
Rating
Price
Stock
Availability
Add to cart
Description
Content
Weight
Dimensions
Additional information
Click outside to hide the comparison bar
Compare
Search for:
Search
WhatsApp us
Finish Course Early?
You have not completed all required lessons and assessments.
Your Progress
0%
Go Back to Course
Complete Anyway
